I came across an article today talking about how black silicon will revolutionize solar power. The idea developed at Harvard (and now at a company called SiOnyx) is basically to blast the surface of a silicon wafer with a high intensity laser for a very short interval. This short time “melts” the silicon and when it comes back together it has a structure allows the structure of the silicon to absorb more light. They also utilize a new type of doping, (doping is insertion of low quantities of specific elements, such as phosphorus, into silicon in order to change the properties of the silicon. Depending on the type of dopant the silicon may want to release an electron or absorb one); the laser process likely allows better penetration of the dopants into the silicon, which usually are accelerated into the silicon with HUGE magnets. There aren’t specifics about the entire process, but as you can see in the picture below, the silicon seems to stretch upwards creating cones of silicon. I would guess that the process is similar to carbon nano-tubes where they also use a laser to blast the carbon. It also makes sense that the process would work for silicon given the similar structure between carbon and silicon.

I was going to call this post “A portrait of an electrical engineer as a young man (or woman)” but decided against it. I’ve got nothing on James Joyce, neither in loquaciousness nor confusing writing.

Anyway, I have been pondering what kind of employee I would hire out of school for an electrical engineering position. There are some basic skill sets that will allow just about any young engineer to succeed if they have these skills (the best situation) or at least appear they will succeed if written on their resume (not the best situation). Either way, let’s look over what a new grad should have on their utility belt before going out into the scary real world.

Either my readership has extended to people at multinational corporations or the idea is intrinsically viable enough to actually work! Either way, I’m happy.

Junko Yoshida of EE Times reports that Sharp Corp and TDK corp have both displayed home mock-ups that include DC modules running of of solar cells and do not require any AC/DC or DC/AC conversion (thereby saving power wasted on the conversion process). This is reminiscent of when I asked if DC can power an entire home. They cite instances of using DC power to directly use in LED home lighting, flatscreens and various other commercial products.

I had an opportunity to go to a conference last week where I stood in front of a booth for 4+ hours. By the end I was chugging coffee to stay awake and my lower back hurt so bad that I had to lean on the table in order to appear that I was still functional as a presenter and engaged with people that came up to talk to us. I really couldn’t believe how much things have changed. When I was working night shift in the fab, there would be nights where I would stand for 8+ hours of a 12 hour shift, oftentimes standing in front of a machine, modifying something on a touchscreen. I know this could have been even worse and that many people deal with even longer and more strenuous hours, but the difference between my old work environment and my current one is pretty glaring to me.

Tonight, I’m using every bit of my being not to post something political (watching the VP debate). The tension in this country is so thick you can cut it up and serve it. Anyway, instead I will post a question (to myself).

Why did I start ChrisGammell.com?

I’ve written before about why I started a blog, but never why I decided to make it a namesake site (using my real name, all over the place). The main reason is branding. Pure, simple and maybe a little bit selfish. It’s actually a lot of work to get people to know your name. It’d be much easier to start a blog titled “AnalogElectricalEngineering.com” or something like that. That would be great for the average Analog Electrical Engineer, but not so much for Chris Gammell. In that case, I would have to work extra hard to let people know who I am and what I do. So why else? I like trying to be an individual (even if it complete individuality may not be possible). I love the idea that people are reading my ideas. I like the attention, sure, but moreso, I like contributing to society, even a little bit. Perhaps it’s a characteristic of Generation Y, but I enjoy it and I’ll spend some late nights to help out if I can. Yet another reason is that I enjoy challenging myself to learn knew things. True, I feel a little guilty blogging about things I’m not a master of, but if I spend some time researching, I can usually point readers in the right direction, even if I’m not completely sure. The best point is where I define a problem for myself online and then figure it out and get to post it later.

Two things will make people want to use less power: not giving them much to start with and making it prohibitively expensive. Both of these scenarios seem to be dovetailing right now with the shrinking of many devices and energy becoming an ever more expensive and sought after.

Sure, there are people out there trying to create and harvest more energy. Either through more drilling, more wars, more acquisitions or new technologies. But eventually, people start to question why we are using so much energy in the first place. Instead of running device batteries into the ground quickly, why not draw less current? Instead of putting a bigger more expensive battery on a device in the first place, why not come up with new techniques to conserve power? Instead of paying high prices for energy and polluting the environment, why not conserve energy in our devices so that we don’t need as much energy overall?

I’m sure it’s one of the first times I’ve ever thought this, but right now I’m really glad I didn’t go into finance for a career. OK, that’s untrue, even though the money is good for them, I’ve always recognized that the lifestyle stinks. But holy moly, those guys (and gals) are probably not having a great time right now, even if they’ve socked away money before this month.

As any part-time pessimist would do in rough economic times, I’ve been thinking about work and how I could be affected by an extended recession. I’m not too worried that a possible economic downturn will have me out on the street tomorrow, but of course I wonder what might happen in the near- to mid-future. Furthermore, being the perpetual optimist, I am trying to see how a recession could be good not only for engineers, but also for engineers (and others) in Generation Y. So for now, forget about golden parachutes, let’s think about silver linings:

This blog started when I moved back to Cleveland. Really, it was a little bit sooner, but it got going full time once I was settled in back in May. Since I’ve been back, I’ve actually really enjoyed it. There are some things I miss about Austin (where I used to live), but I am happy with my decision, most notably because of my job. I feel like I am part of the minority that is moving back North, that others in my generation are more likely to head south at the first opportunity.

Hi Everyone,

I have been reading some ways to take a blog to the next level, linked by the ever resourceful and connected Seth Godin.

I am considering switching themes. I had a rough time of it when I was using StumbleUpon a while back and came across a few different sites that had the same theme as this one. It’s a testament to the creator of the theme, but a bad way to stand out.  As such, I’m going to embark upon making my own theme. I’m sure there will be some component of circuits and analog electronics on there. I mean, this is an analog blog, right? If you have any suggestions for me, please leave them in the comments.

“Hmm, I should really get a sound sample for the before and after on my piano. I’m so confident I can get this thing to work that I want some evidence how broken it was prior to my genius fixing of this machine.”

POP. ZAP. HUMMMMMMMMMMMMMMMMMMMMMMM.

“EEP,” thinks Chris.

HMMMMMMMMMMMMMMMMMMMMMMMMMMMM….

So it seems that I may have broken the amplifier on my Wurlitzer 200A. This after I took my sweet ol’ time getting all the replacement parts in from Mouser. After they finally arrived, I scheduled a time to work on the piano on the weekend to try and fit into my relatively busy schedule.